HYDRO BAN Waterproofing Membrane
April 30th, 2016
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
Key Features
- Allow for flood testing in 2 hours at 70°F (21°C) or higher*
- Does not require the use of fabric**
- Bonds directly to metal and PVC plumbing fixtures only
- Thin; only 0.5 mm–0.8 mm thick when cured
- Changes in colour from a light sage to an olive green when cured
- Anti-fracture protection of up to 3 mm over shrinkage and other non-structural cracks
- "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Exceeds ANSI A118.10 and A118.12
- IAPMO approved
- Contains antimicrobial product protection
- Rapid drying for a faster time to tile
- Lighter colour for ease of inspection
- Safe—no solvents and non-flammable
- Install tile, brick and stone directly onto membrane
* Refer to cautions section of data sheet for more information on curing
** For gaps 3 mm or less see TDS1003 for complete instructions
LATICRETE Pty Ltd - Globally Proven Construction Solutions
29 Telford Street - Virginia, QLD 4014 Australia
By The Splash Team
Subscribe Today
Get the latest industry news & free magazine direct to your inbox.